Installation  Details For 40X40 Oil rubbed bronze Led Shower Head

If you are thinking about purchasing a LED shower head you will need to consider the finish style that blends with the rest of your shower and bathroom fixtures. If your shower fixtures are of Victorian Venetian bronze style then you would need to select a shower head of a similar finish. You can choose from BathSelect many oil rubbed bronze shower heads, they come in several styles and sizes.

At Bath Select we carry
16 inch oil rubbed bronze color changing shower head, we also carry the 20 inch oil rubbed bronze LED rain fall shower head as well as the24 inch oil rubbed bronze led shower.

Those LED lights in the ORB showerhead would not need any wiring nor do they need any battery to light up the bathroom since they are powered by water flow.They are one of the recent innovations to be introduced in the market displaying many different colors. You can select from BathSelect those ORB shower head in 3 or up to 9 multiple rainbow colors RGB. The color will change based on water temperature, they will flash red if the water is too hot (above 114 deg F / 46 deg C) so you do not burn yourself. LED lighting in the shower will change the appearance and atmosphere of a shower cheaply and easily.

The LED lights will create a warm, relaxing glow as you relax in the bath and as they are totally waterproof there is no need to worry about ever splashing water on them. Even if your house’s power was cut off, the RGB LED light shower head will light your bath up and you can continue to enjoy your shower.The bathroom shower have been called energy saver, but the proper name for them would probably be water savers, due to their function of allowing us to use less water than we would normally use.

Oil rubbed bronze LED color changing shower head Installation

Installing Led Light Water Powered Shower Head;is easy and simple.

1. Remove your existing shower head with a wrench.
2. Set the wrench in place and turn the nut to the left to loosen it.
3. Have a hand ready to catch the shower head when it falls so that the metal doesn’t crack your shower floor.
4. Clean the threads of the base of the showerhead steel wool.
5. Be sure to remove any debris that had collected around the threads.
6. Wrap the threads with Teflon tape, This tape comes with almost all new shower faucets and heads and provides traction for the new hardware.
7. Place a rubber “O”-ring inside the new showerhead and water connection, this prevents any leaks and improves water pressure.
8. Tighten the LED shower head.
9. Test the Temperature Controlled Shower Head to make sure there are no leaks and that everything is working properly.
10. Now you have a huge improvement in your bathroom for a minimal amount of cost and effort.

Check our selection ORB Led Shower Head