Commercial Kitchen Faucets Wall Mounted: Buying Guide

Commercial kitchen faucets wall mounted would be a marvelous choice for the modern families who wish something distinctive to include in their new kitchen. These faucets will make your kitchen look fully new while adding class and beauty at the same time. Commercial kitchen faucets are available in basic materials, finishes and shapes to handle design if you’re going for a European look in the kitchen or bathroom.

European design wall-mounted faucet works well providing less visual impact to distract. If you’re designing a kitchen and want to enlarge the dimensions of the window over the sink it will not interfere with the visual line of sight. Plus Wall Mount Faucets make counter cleaning a breeze as there are no obstructions on the counter to clean around. Commercial kitchen faucets when are installed on the wall vs deck mounted they can be an ideal choice if you have minimal space. Or because it fits your kitchen design plans.

Commercial Kitchen Faucets wall mounted are about the most convenient faucets around. If you have a sink that is molded into the worktop and you don’t want to drill holes into it, install a commercial kitchen wall mounted pre-rinse faucet. They’re also a good choice if you want a Faucet that will be out of the way when you are not using it.

How To Install Wall Mounted Commercial Kitchen Faucet

• Step 1

Turn off the hot and cold water inlets for your Kitchen Faucet. They’re usually set in the cupboard below the commercial sink faucet. It is recommended to use a Phillips screwdriver, adjustable wrench, and safety glasses.

• Step 2

If there are 3 holes in your countertop or sink you’ll need to put in a deck plate. Position the deck plate and it’s gasket over the middle mounting hole to cover the holes you don’t need. Then insert the hoses and commercial sink faucet shank into the mounting hole. If there is one hole in your countertop or sink, feed the hoses and faucets shank through the spout base gasket and align it to the base of the faucet. Then insert the entire assembly into the mounting hole. Ensure the handle is on your right and the spout is facing you.

• Step 3

The hot supply line with white tag ought to be connected to the hot water inlet. Secure the connection with an adjustable wrench but don’t over-tighten. Now attach the cold side in the same way.

• Step 4

Feed the tiny end of the pullout hose into the faucet spout. Take away the protecting cap on the tip of the hose, and then slide on the doughnut formed weight. Connect the pullout hose to the Commercial Sink Faucet inserting the hose into the connector. A click indicates a secure connection.

• Step 5

Ensure the commercial Sink Faucet handle is in the off position and flush the system to get rid of any debris. Turn the hot and cold water inlets back on. Position the pullout hose into the sink and turn on the faucet.

• Step 6

Take away the protective cover on the tip of the spray wand and attach the spray wand to the pullout hose. Ensure the rubber washer and screen are in place.

• Step 7

Clean up in order for the spray wand to function properly.