Best Shower Body Jets Installation Instructions Guide

Installation Instructions Shower with Body Jets

Anellie Michelle

Apr 4, 2018 1 min read

6688 views

Bathroom shower set with body jets installation

For models BST BathSelect – this shower system has a shower head, a handheld shower head, and 6 pulsating body jets. It has a diverter valve, so you can easily adjust the different functions of the shower. Here is the simple and effective shower body jets installation photo guide, simple and effective instructions.

adjust the settings to ensure a comfortable and efficient shower experience and cleaning the shower components as needed.and flow are satisfactory and level attach the plumbing lines to each body jet check for any leaks in the system and tighten connections if necessary check for even water distribution from each body jet check the overall functionality of the system clean the installation area of any debris confirm that all body jets are securely mounted and adjusted connect the diverter to the water supply lines drill drill holes into the wall where the body jets will be placed dust ensure the system is fully operational and that water pressure ensuring all connections are tightened and properly sealed with plumber's tape to prevent leaks ensuring it is connected to the water supply lines securely using appropriate fittings ensuring that each body jet and the showerhead are functioning correctly and providing adequate water flow ensuring the correct positioning for optimal water flow gather all necessary tools including a pipe wrench inspect the shower wall and space to ensure there is enough room for the body jets and related plumbing install the diverter valve or control system install the shower valve first install the showerhead if not already included in the system Installation Instructions for Shower with Body Jets: Turn off the water supply to the shower to prevent any water leakage during installation making sure it is properly adjusted and aligned with the shower controls making sure the diverter valve or control system works smoothly making sure the holes align with the body jets' fittings mount the body jets on the wall or anchors or excess materials perform a final water flow test to ensure all jets are working properly plumber’s tape positioning it at an appropriate height and angle for comfortable use regularly maintain the system by checking the jets for clogs or buildup remove any existing shower head or components if replacing an old shower system screwdriver screws seal any gaps between the wall and the body jets or shower components using silicone sealant to prevent water damage secure the body jets to the wall with the necessary mounting brackets temperature test all water connections verify the temperature and water pressure are consistent across all body jets and showerhead which allows users to switch between the showerhead and body jets

written by

Anellie Michelle

Anellie understand the Art and Science of Home remodelling. She has been working in the industry since last 12 years with some of the nation’s top design firms and most-prominent clientele. Michelle's portfolio includes new constructions as well as high end remodelling assignments. She actively write about her work on her own blog and has been featured in various online publications and industry blogs.

Read next

Technical Details of Surf Hydromassage Bathtub

BathSelect Installation Guides

Anellie Michelle

Apr 04

1 min read