Installation Instructions Bravat Oil Rubbed Bronze Automatic Sensor Faucets Post author:Anya Sloane Post published:March 30, 2018 Post category:Installation Guides views 2,116 👁 2,116 views•⭐ 4.5/5 (100) Bravat Oil Rubbed Bronze Automatic Sensor Faucets Installation For models BST BathSelect. About the Author Anya Sloane Hospitality Bathroom Design & Fixture Selection Advisor This author shares expert insight, practical guidance, and industry-focused perspectives for readers. Read More Tags: a screwdriver, adjust the sensor’s sensitivity and range settings to match user preferences, and a tape measure, and there is no movement, and water flow, attach the sensor unit to the faucet, check for leaks at all connection points, check the water temperature control to ensure it operates smoothly, clean the faucet and surrounding area for a tidy finish, complete the installation by confirming everything is functioning correctly, confirm that the faucet is securely mounted, connect the water supply lines to the faucet’s inlet valves, connect the wiring from the sensor to the faucet control module, double-check the connections to ensure they are tight and secure, ensure that the Bravat oil rubbed bronze automatic sensor faucet kit includes all required components, ensure that the installation complies with local plumbing and electrical codes, ensure the wiring is properly insulated and protected from any water exposure, ensuring it is easily accessible, ensuring it is positioned securely, ensuring there is no water leakage from the faucet or the sensor system, following the manufacturer’s instructions for proper alignment, gather necessary tools, install the power source for the sensor, Installation Instructions for Bravat Oil Rubbed Bronze Automatic Sensor Faucets – Turn off the water supply to the faucet area, maintain the faucet regularly by cleaning the sensor area and checking for performance issues., mark the location on the sink or countertop where the faucet will be installed, monitor the system over time to ensure reliable sensor operation, mount the control module in a suitable location, mount the faucet body onto the sink, perform a final test of the entire system to confirm that the faucet operates correctly and the sensor works within the specified range, securely tighten the water connections with a wrench, such as wrenches, test the faucet’s motion sensor by turning on the water supply and ensuring the faucet activates when hands are placed under the sensor, tighten the mounting bolts to hold the faucet firmly in place, use plumber’s tape to seal the connections to prevent leaks, verify that the sensor activates and deactivates reliably as hands move near the faucet, verify the faucet is dispensing water at the desired temperature, which may include batteries or a power adapter Read more articles Previous PostDigital Display Mixer Shower System Next PostInstallation instructions ADA commercial motion sensor faucets You Might Also Like Temperature Control of Sensor Faucet March 27, 2023 Installing 40X40 Oil rubbed bronze Led Shower Head March 31, 2018 Motion Detection Infrared Sensor Faucets Installation Instructions January 10, 2025
