The Hands Free Motion Sensor-operated mounted faucet, is made of solid brass construction body faucet anti-erosion, anti-abrasion and high strength. They come in different finishes chrome, oil rubbed bronze, or gold plated finish. These Sensor Faucets are ADA compliance and fit for residential or commercial use. A/C and Battery Powered Faucet BathSelect

Prior to installation

Before installing the sensor faucet, please open the box to check the packing list whether it includes all the items as the above.

Installing iqua sensor faucet

Please install touchless sink faucet per installation instruction. Note: We don’t supply inlet pipe. Before installing Control module assembly, please check your inlet pipe whether it could be connected to the deck enough.

Please shut off the water valve of inlet pipe before installation.

Please check whether detection zone factory set as “SPECIFICATION” meets your requirements; otherwise please adjust it complying with your requirement. The steps as follows:

Adjustment of sensor distance

: Loosen the 600MM flex hose deasil from faucet assembly. Loosen two nuts under the base gasket using head screwdriver, please push the “sensor eye” slightly and take it out. Loosen six nuts from the control module assembly, open and take out battery compartment, put 4AA alkaline batteries into battery compartment. Connect fiber optic cable battery compartment. (Note: When connect optic cable to battery, without sensor object near the sensor location) Please use your hand to approach the “sensor eye” slowly from exceeding 30cm, When your hand in sensor location, you will hear beep from the battery compartment, meanwhile, the LED in the “sensor eye” flash red. A small nut is on the chipset located on the basis of “sensor eye”, turn around the small nut anti-clockwise to long or short of sensor distance. When finished adjustment, please take off fiber optic cable from battery compartment, meanwhile take out the batteries. Put the “sensor eye” into faucet assembly, put the faucet assembly together with fiber optic cable through the holes into the base of trim plate without border & base gasket, and then screw the two nuts of gasket.

Connect flex hose to basis of spout

(direction towards without nut).

Screw the two studs into trim plate with head screwdriver.

Put two (2) fender washers on the holes on top of deck which for inserting two studs. 5. Insert faucet assembly and fiber optic cable together with flex hose and studs through holes in deck. 6. Using two (2) fender washers into the two studs from below deck, and then put two (2) finger nuts supplied into two studs, screw them into studs from below deck to secure trim plate on deck.

Install Control module assembly

Before install Control module assembly, please check the place of deck and installation place of Control module assembly. If confirmed, please put the Control module assembly onto the wall first, and use drill bit to anchor the four holes. (Figure 4 Control module assembly)

1. Using ø6mm drill bit follow the four anchors to drill four holes into wall.
2. Using hammer knock the four plastic wall anchors supplied into wall.
3. Installing Control module assembly to wall, knock four self–tapping screws into four plastic wall anchors. Then the Control module assembly is installed onto wall.

Connect flex hose to solenoid valve

Use wrench to connect the free end of the flex hose to the outlet side of the solenoid valve.

Connect fiber optic cable

(Figure Connect Fiber Optic Cable)
1. Connect the free end of fiber optic cable to the Control module assembly.
2. Thread the connector cap with nut onto the Control module assembly to secure the connection.

Note: Please keep the sensor plastic cable clean and dry when install it, in order to keep the machine workable.

Note: When installation is finished, please use a small piece of soft and dry cloth to wipe away the “sensor eye” slightly.

Battery installation

Note: DO NOT INSTALL THE BATTERIES UNTIL THE FAUCET IS COMPLETELY INSTALLED. If the batteries are installed before the fiber optic cable has been connected to the Control module assembly, the faucet will not properly set the sensing range for the sink on which it has been installed. Loosen the cap of control module assembly with head screwdriver, and loosen the cap of battery compartment. To ensure proper operation, inset four (4) new C-size alkaline batteries. Check that the orientation of each battery matches the positive (+) and negative (-) symbols shown in the bottom of the battery compartment. Make sure that spout is properly centered and that no objects are in the sink. Close the cap of battery compartment and cap of the control module assembly follow the above steps.

Connect inlet pipe

Please connect inlet pipe to control module assembly.

Note: Please use the proper inlet pipe into diameter of inlet on solenoid valve.

Very Important: Please turn off the inlet pipe valve to install the inlet pipe.

Turn on the inlet pipe valve

Please turn on the inlet pipe valve, to check whether water flowing and sensor distance meets your requirements. If not, Please follow the above ways to adjust the sensor distance again. BATTERY REPLACEMENT PROCEDURE Battery powered faucet with 4AA alkaline batteries can be used for 2 years at 200 cycles a day. When the batteries are low and need to be replaced, the faucet will signal you, when your hand approach the sensor location, the LED will flash red three times quickly without water out; when without object to approach the sensor location, the LED will red one time per four second. At this point we recommend battery replacement. To replace batteries: Note：Water supply to the faucet does not need to be turned off when replacing batteries. Loosen the cap of control module assembly with head screwdriver, and loosen the cap of battery compartment. To ensure proper operation, inset four (4) new C-size alkaline batteries. Check that the orientation of each battery matches the positive (+) and negative (-) symbols shown in the bottom of the battery compartment. Make sure that spout is properly centered and that no objects are in the sink. Close the cap of battery compartment and cap of the control module assembly follow the above steps. Upon installation of the batteries, faucet will begin a new self calibration procedure. SOLENOID SCREEN FILTER CLEANING PROCEDURE Before cleaning the screen filter, turn off the water supply at the supply stop(s). Turn off the inlet pipe. Activate the faucet to relieve any pressure in the system. Clean the screen filter using fresh tap water. If necessary, use a small brush to clean. Use caution while cleaning to prevent damage to the solenoid screen filter. Connect the inlet pipe; turn on the water supply at the supply stop(s). Activate the faucet to purge any air from the system lines. Check for leaks and repair as necessary.

• The Self-Power Sensor Faucets
  BathSelect’s self-powered sensor faucets provide energy efficiency without the need for hardwiring, making them ideal for eco-conscious commercial spaces. Built for high-traffic environments, they combine seamless integration with minimal maintenance.
  Learn more here
• Trends in Touchless Faucets
  BathSelect highlights leading touchless faucet trends, featuring advancements in sensor technology and water efficiency that align with sustainable design principles and add modern appeal to commercial restroom spaces.
  Discover trends here
• Touchless Faucets
  BathSelect’s touchless faucets prioritize hygiene and user convenience. Designed for durability, these faucets are an excellent choice for commercial spaces requiring reliable, hands-free operation with low maintenance needs.
  Explore touchless options here
• Top Commercial Restroom Design Trends for 2024
  BathSelect examines 2024 restroom design trends that prioritize wellness, sustainability, and technology. Each fixture is crafted for performance and efficiency, helping architects and contractors create future-focused, high-quality spaces.
  Read design trends here
• Wall Mount Public Restrooms Commercial Motion Sensor Faucets
  BathSelect’s wall-mounted motion sensor faucets offer a space-saving, modern solution for high-traffic restrooms. Designed for seamless wall integration, they’re durable and water-efficient, perfect for architects looking to optimize space and design.
  Discover more here
• Commercial Bathroom Faucets
  BathSelect’s commercial faucets combine sleek design with industrial-grade durability, crafted for heavy use while enhancing restroom aesthetics. These faucets are an ideal choice for contractors aiming to meet stringent quality and durability standards.
  Explore options here
• Temperature Control of Sensor Faucet
  BathSelect’s sensor faucets with temperature control are designed for safety and comfort in commercial restrooms. With easy-to-adjust settings, they offer user-friendly functionality while meeting industry standards for safety and efficiency.
  Learn more here
• Making Motion-Sensing Faucets Work for You
  BathSelect’s motion-sensing faucets provide dependable performance, ideal for high-traffic commercial installations. They are designed for easy integration and meet durability requirements, ensuring long-lasting functionality in busy environments.
  Read more here
• Foot Pedal Commercial Sensor Faucet
  BathSelect’s foot-pedal sensor faucets offer a hands-free solution for commercial restrooms, designed for high use and hygiene. Their straightforward design integrates well into any restroom layout, making them a versatile option for contractors.
  Explore foot pedal faucets here
• Comparison of Top Soap Dispenser Brands
  BathSelect compares leading soap dispensers, evaluating each brand on durability, ease of use, and maintenance. With options tailored for commercial use, contractors can choose the best solutions for high-traffic environments.
  Read comparison here
• Public Restroom Bathroom Fixtures
  BathSelect’s restroom fixtures are crafted for heavy use and designed with easy maintenance in mind. Each fixture complements modern restroom designs, offering durability and efficiency suited for public spaces.
  Learn more here
• Motion Sensor Faucets Installation Instructions
  BathSelect’s installation guide for motion sensor faucets provides clear steps and practical tips for ensuring secure and effective setups, meeting commercial requirements for long-lasting performance.
  View instructions here
• Best Independent Reviews of Over 5 Faucet Brands
  BathSelect shares independent reviews of top faucet brands, focusing on quality, design, and reliability, helping architects and contractors select the best options for commercial projects.
  See reviews here

Operation:

1. Place hands under spout and directly in front of neck mounted sensor, water will begin to flow out in less than a second, water flow rate is governed by aerator and supply pressure, water temperature is governed by position of water mixture selector, as well as water temperature in supply pipes. Please remember, automatic faucets employ presence” not “motion” sensors. An idle object placed directly underneath spout will immediately activate faucet.
2. Remove hands, water will cease to flow within 1-3 seconds.
3. If hands are left underneath spout for more than 60 seconds, water will automatically shut off. To initiate flow again move hands away from faucet and start at step 1.
4. When attempting to run water over small objects such as tooth brush, it may be necessary to bring object closer to sensor to initiate water flow, when water begins to flow, move object back under stream of water. Once user “gets the feel” of the faucet this step may be skipped.
5. Faucets with water mixture selector above the sink. Water mixture ratio is adjusted from hot to cold and anywhere in between by moving lever. Battery Replacement Instructions: Batteries should provide 12 to 36 months of reliable service mostly depending on the make of battery used and the frequency of usage among other factors. Battery weakness is indicated by constantly flashing led light within the sensor capsule.

When replacing batteries please follow these simple steps:

1. Unplug Battery from faucet.
2. Unfasten the 4 Philips screws that hold the enclosure cover on, pull enclosure cover off.
3. Replace batteries with 4 AA Alkaline batteries, make sure batteries are placed in their proper
   position.
4. Re-install battery pack into the Faucet.
5. Test faucet prior to placing enclosure cover back on.

Trouble Shooting: Faucet does not operate, red light does not blink:

1. Batteries need replacing, replace batteries, see battery replacement instructions.
2. Sensor wire loose, unplugged, plugged improperly, plug sensor wire properly. See installation instructions.

Water flows out of faucet even though hands or objects are not present under spout:

1. Objects (such as sink lip) are present in front of sensor. (See special installation note at the back page).
2. Battery wire not plugged in, batteries need replacing.

Faucet does not operate, red light blinks in response to approaching objects:

1. No water, very low water pressure in supply pipes, supply valves closed.
2. Water pressure very high, well above 115 PSI.
3. Screen filter severely clogged up.
4. Supply hoses severely kinked.

Faucet leaks, drips:

Constant leaks or drips indicate defective solenoid valve, send Faucet Automator for repair or contact an authorized plumbing professional.

Faucet continues to run for 30 -60 seconds after hands are removes:

This very rare condition generally occurs due to over sensitivity on the part of the sensor, system water pressure well above 70psi and an over lit bathroom environment.

This condition is always field curable.

1. Turn down water pressure at both angle stops.
2. Adjust sensor range. See Sensor Range Adjustment in this manual.
3. Objects (such as sink lip) are present in front of sensor. (See special installation note at the back page).

LIMITED WARRANTY

BathSelect warrant this faucet to be free of defects for a period of 3 years year from date of purchase. BathSelect will replace, free of charge, during this warranty period, parts that prove defective when properly installed and under normal use and service. Damage that occurs as a result of abuse, improper installation, environmental conditions, or improper application will void this warranty. Products must be shipped with postage and handling prepaid, along with dated proof of purchase. This warranty does not cover installation or any other labor charges. it does not cover shipping and handling of both replacement parts and returned defective parts. Products or components that have been altered or in any way modified will not be covered under this warranty. Replacement parts are under warranty only for the remaining period under the initial warranty. Some states do not allow for exclusion of incidental or consequential damage.

Special Installation Note

Automatic faucets are design to perform properly in a variety of applications. There are some conditions, however, that may adversely

Please note the following conditions prior to installing you new faucet:

1. Your automatic faucet is designed for indoor applications. This faucet is not designed for outdoor applications.
2. Avoid installing your new faucet in direct sunlight. Direct sunlight that is focused on sensor will temporarily disable faucet’s sensing capabilities.
3. When installing your faucet to your counter top please view the drawing below and read accompanying note.
4. When choosing a location to install the Faucet Automator, make sure that it will not be in direct contact of copious amounts of water.
5. If you choose to install your faucet to one water source only, do not install to hot water only as this may result in scalding injury.
6. When installing more than one faucet:

For optimal performance couple spout and Faucet Automator (the gray box) that were shipped together.

See also:

Basic tools needed for Installing Sensor Faucet

Sensor Faucet Frequently Asked Question – FAQ

Commercial Sensor Faucets

ADA Handsfree Touchless Sensor Faucet compliance guide