Water pressure can be a problem in some homes or apartments. Typical home water pressure should be anywhere between 45-55 psi (pound of force per square inch). If you feel your shower pressure is low or you have doubts about your water pressure you may test your water pressure by hooking up a simple pressure gauge (you can simply test it yourself if you buy water pressure gage usually less than $10)

Low water pressure in the shower could be related to the simple issue or could actually be a bigger problem. Many issues related to low water pressure in the shower are due to shower fixtures themselves; for example, the showerhead may have over the course of time accumulated mineral debris. On the other hand, a more serious issue could be rough in plumbing. We will present here a few solutions on how to increase water pressure in the shower:

To increase the water pressure in your shower, here are some steps you can take:

Check the water pressure: First, ensure that the water pressure from your main water supply is adequate. You can do this by checking the pressure gauge on your water meter or contacting your water provider to inquire about the water pressure in your area.

Remove any flow restrictors: Many showerheads and faucets are equipped with flow restrictors to conserve water. These can limit the water pressure. If your showerhead has a flow restrictor, you can try removing it to improve the water flow. Consult the manufacturer’s instructions or search online for guidance specific to your showerhead model.

Clean the showerhead: Over time, mineral deposits and debris can accumulate in the small openings of your showerhead, reducing the water pressure. To address this, unscrew the showerhead and soak it in a mixture of vinegar and water for a few hours. Afterward, use a brush to gently scrub away any remaining buildup. Rinse the showerhead thoroughly before reattaching it.

Check for clogged pipes: Mineral deposits, rust, or other debris can accumulate in the pipes leading to your shower, causing reduced water pressure. If you suspect clogs, it may be beneficial to call a professional plumber to inspect and clean your pipes.

Install a high-pressure showerhead: Consider replacing your current showerhead with a high-pressure model. These showerheads are designed to optimize water flow and provide a more powerful shower experience. Look for options specifically labeled as “high-pressure” or “high-flow” when shopping for a new showerhead. A high-quality high-pressure showerhead should noticeably improve the water pressure in your shower compared to your previous showerhead. If you experience a stronger and more invigorating water flow, it is a good indication that you have chosen a showerhead that delivers high pressure.

Consult a plumber: If you’ve tried the above steps and still have low water pressure, it’s recommended to consult a professional plumber. They can assess your plumbing system, identify any underlying issues, and provide expert advice on how to improve water pressure specifically for your shower.

How to Increase water pressure in shower

There are several potential solutions to consider. First, check the overall water pressure in your home to ensure it’s not the root cause of the issue. Next, remove any flow restrictors that may be installed in your showerhead, as they can limit water flow. Cleaning or replacing the showerhead can help remove mineral deposits and improve water flow. Check for obstructions or blockages in the showerhead or water supply pipe and clear them if necessary. If low water pressure is a persistent problem, installing a pressure-boosting device like a water pressure booster pump might be a viable option. It’s important to be mindful of local regulations and water conservation guidelines, and consulting a professional plumber for guidance is advisable for any plumbing modifications.

Having trouble with water pressure in your apartment? Is the water pressure too low for your comfort? There is nothing to worry about. There are several easy and quick ways/methods of fixing the problem. You could for example; clean the showerhead by dipping it in vinegar, check the main water supply, or you could simply replace the water-restricting showerhead with one that gives a higher water pressure.
High-pressure showerheads are showerheads that are designed to provide you with high pressure water flow thus providing you a massaging comfortable experience. One such solution is the amplifying showerhead. The amplifying showerheads increase the water pressure and velocity of the water flow to provide a better shower experience.
Types                    
High pressure showerheads overall increase water pressure in similar ways and have similar features. The difference is usually in mounting showerheads which in turn will also affects water pressure in some degree.

1. Handheld showerheads

Handheld showerheads are showerheads but in a sense a manual handled allowing you to control where the water flow is more needed. Most such showerheads have different and multiple massage features.

2. Rain showerheads

Rain showerheads are typically wide broad showerheads that are fixed horizontally to give a steady water flow similar to a real rainfall or waterfall. These can be both ceiling-mounted and wall-mounted.

3. LED showerheads

Some showerheads come installed with built in LED Showerhead lights which are available in many colors. These LED lights are temperature controlled; meaning shades of red for hot water and cooler shades for lower temperatures.
Features
Features of high pressure showerheads are similar to other showerheads and come with many functions.

4. Showerhead

The part that releases the water is the showerhead. Perforated with holes, this is where the water comes from.

5. Tap

The tap controls the water flow. The tap can also play an important factor in order to increase water pressure in shower.

6. Settings for adjustable spray or pressure chambers

The high pressure of the showerheads is by the pressure chambers which work by adding air to the water in order to increase water pressure. In others the spray can be adjusted to increase pressure.

The defining feature of high pressure showerheads is the high water pressure. High pressure showerheads also usually have the adjustable features most other showers have. Some for example have adjustable sprays; you can control the volume and frequency of the spray. They may even include LED features, chromatherapy and steam features.
The showerheads can come in various styles and designs, depending on the aesthetics of your bathroom. There are different shapes of showerheads; circular, rectangular and square, from which you can choose the one that best suits your bathroom.
1. BathSelect Vintage 8 inch Antique Rainfall Showerhead

Benefits

1. Water conservation

The most obvious and helpful benefit of high pressure showerheads is that they conserve water. The showerheads can help you rinse out and clean yourself faster with the same amount of water and thus you will need shorter baths and conserve water.

2. Lowers water bills

Water conservation in turn will help reduce your water bills. You can save a lot of money by installing a high pressure showerhead as you will be consuming much less water for equally comfortable baths.

3. Comfortable baths

High pressure showerheads make the experience of showering much more comfortable and enjoyable. With the high pressure, the water flow feels much like a soothing massage. The high pressure showerheads also normally have different water patterns. You can adjust the water pattern to suit your needs.

3. Breges Square Waterfall And Rainfall Shower Head

how to increase shower pressure

How to Increase Shower Pressure

To increase the shower pressure in your bathroom, you can try the following steps:

1. Check the water pressure: Verify if the overall water pressure in your home is adequate. If it’s low throughout the house, you may need to contact a plumber to assess and address any underlying issues with the water supply.
2. Remove flow restrictors: Many showerheads have flow restrictors installed to conserve water. These restrictors can limit the water flow and reduce pressure. Check if your showerhead has a flow restrictor and consider removing it. Keep in mind that removing flow restrictors may increase water usage.
3. Clean or replace the showerhead: Over time, mineral deposits and sediment can build up in the showerhead, clogging the nozzles and reducing water flow. Clean the showerhead by soaking it in vinegar or using a descaling solution to dissolve the buildup. If cleaning doesn’t improve the water pressure, consider replacing the showerhead with a new one designed for high pressure.
4. Check for obstructions: Inspect the showerhead and the water supply pipe for any obstructions or blockages. Debris or sediment accumulation can hinder water flow. Remove any blockages or consult a plumber for assistance if needed.
5. Consider a booster pump: If your home’s water pressure is consistently low, you might consider installing a pressure booster pump. These pumps are designed to increase water pressure throughout the plumbing system, including the shower. Consult with a professional plumber to determine if a booster pump is suitable for your specific situation.

Remember to be mindful of water usage and local regulations when making adjustments to water pressure. If you’re unsure or need assistance, it’s advisable to seek the guidance of a professional plumber.

Check out our Best Shower Heads

 The FontanaShowers® New Brass with Chrome Polished Finish Contemporary Shower Head

Rio Stainless Steel Automatic LED Changing Color Bathroom Shower Head with 4 Function and Touch Screen Control in Chrome Finish

8″ Solid Brass Square Multi Color LED Rain Shower Head

Trialo Color Changing LED Shower Head with Remote Control

 Fontana Water Fall Roman Square Rain Shower Head

Check our Large Flow Shower System